A canker is a dead, often sunken patch of bark on a branch or trunk, and it is one of the most common tree problems a gardener or tree lover will meet. Cankers are usually caused by fungi or bacteria that enter through a wound, such as a pruning cut, a crack from frost, or damage from a mower or a storm.
The good news is that many cankers are slow, and a healthy tree can often wall them off and keep growing. The bad news is that some cankers spread fast and can kill young trees or weaken large ones until a branch fails. Learning to spot a canker early, to tell it apart from harmless bark patterns, and to take the right simple steps gives your tree the best chance.
What a Canker Looks Like
A typical canker is a sunken, discoloured area of bark, often oval or elongated along the branch. The bark inside the patch may look dark, cracked or peeling, and the edges may be raised where the tree is trying to grow new tissue around the wound.
Look also at the growth beyond the canker. If a branch has leaves that wilt, turn yellow or brown, and then die while the rest of the tree looks fine, a canker may be blocking the flow of water and nutrients. In spring, buds beyond a canker may fail to open, or new shoots may emerge and then collapse.
Common Causes of Cankers
Most cankers start with a wound. Fungi and bacteria are present in the environment all the time, but healthy, unbroken bark is a strong barrier. A pruning cut made at the wrong time, a branch torn in a storm, bark scraped by a mower, or a crack opened by frost all give infection a way in.
Stress makes cankers worse. A tree short of water, planted in poor soil, or damaged by construction work near its roots has less energy to defend itself, so an infection that a healthy tree would contain can spread. Some canker fungi are also more active in cool, wet weather, which is why new cankers often appear in spring and autumn.
How to Check a Suspect Tree
If you think you have found a canker, check the tree calmly and methodically before you act. Look at the whole tree first: is the dieback limited to one branch, or is it spread across the crown? A single dead branch is often manageable, while dieback across much of the crown suggests a bigger problem that needs professional advice.
Examine the canker itself with a photo for scale, and check the bark around it for ooze, small fruiting bodies or a sour smell, which can point to bacterial infection. Avoid cutting into the canker to investigate, because this can spread the infection and open a fresh wound. Instead, record what you see and compare it over a few weeks.
Five Safe Steps When You Find a Canker
These steps are safe, general guidance for a home gardener.
- Confirm the problem. Photograph the canker and the affected branch, and check the rest of the tree so you know how much is affected.
- Prune only clearly dead wood. If a branch beyond the canker is dead, cut it back to healthy wood well below the canker, in dry weather, and clean your tools before and after.
- Dispose of the cut wood. Bag or burn the removed branches where local rules allow, and do not compost diseased wood or leave it lying under the tree.
- Reduce stress on the tree. Water during dry spells, keep mulch away from the trunk, and avoid further wounds from mowers, strimmers or digging near the roots.
- Watch and record. Check the canker every few weeks and note whether it grows. If it spreads fast, or the tree is large or near a building, call a qualified arborist.
Prevention Is Better Than Treatment
- Choose species suited to your soil and climate, since a well-matched tree is more resistant.
- Water young trees during dry spells in their first few years after planting.
- Prune with sharp, clean tools and cut back to healthy wood.
- Remove dead branches promptly so they do not become entry points for infection.
Common Mistakes to Avoid
- Cutting into a canker to see how deep it goes. This spreads infection and creates a fresh wound for fungi to enter.
- Painting the wound with sealant. Most sealants do not help and can trap moisture against the bark.
- Leaving diseased branches on the ground. Cut wood can carry spores, so dispose of it properly.
- Using dirty or blunt tools. Dirty tools can carry disease from tree to tree, and blunt cuts heal slowly.
- Ignoring a fast-spreading trunk canker. A canker on the main trunk of a young tree needs professional advice promptly.
Frequently Asked Questions
Can a tree recover from a canker on its own?
Yes, often. A healthy tree can wall off a small canker with new bark tissue and keep growing.
Should I cut off a branch with a canker?
If the branch beyond the canker is dead, pruning it back to healthy wood is usually sensible, provided you cut well below the canker in dry weather and clean your tools. If the canker is on the trunk or a main limb, do not cut it yourself and seek professional advice first.
Are cankers contagious to other trees?
Many canker fungi spread by spores in rain and wind, so a badly infected tree can be a source of infection for nearby trees of the same or related species. Removing dead wood and disposing of it properly reduces this risk.
When should I call an arborist about a canker?
Call one if the canker is on the trunk, if it is growing quickly, if much of the crown is dying back, or if the tree is large or near a house, road or path. An arborist can identify the problem, judge the risk of branch failure, and advise whether pruning or removal is needed.
Cankers look alarming, but a calm, careful response is usually enough: check the whole tree, remove clearly dead wood, keep the tree healthy, and watch for change. If you want help naming the tree first, use the tree identifier and the tree disease identifier guide, and read how to spot sick trees for the earliest warning signs. For serious or fast-spreading problems, a local arborist or extension service is always the safest next step.
Featured image: Wikimedia Commons (CC / public domain).

